Speakers Morel Virtus 62.4

Name: Speakers Morel Virtus 62.4
Brand: Morel
Price: 639.00 EUR
Availability: InStock

Be the first to rate the product

Add to FavoritesRemove from favourites

component speakers, Ø 165 mm, 140 W, 4 Ω, 88 dB (2.83V/1m)
More about the product

Morel Virtus 62.4In stock (3 pairs) 639,00 EUR

Morel Virtus 62.2In stock (8 couples) 639,00 EUR

We will help you with your purchase

You can return the goods to us within 14 days

TipUpdated

Description and parameters
Evaluation0
Category

Speakers Morel Virtus 62.4

The Morel Virtus 62 component loudspeakers are the epitome of Morel's technological advancement. This new two-way system brings emotion to music with a balance of rich, natural mids, high frequency detail and vibrant bass. The Virtus 62 features a hand-crafted MT120N tweeter with a silk dome and patented Acuflex™ finish, offering excellent high-frequency performance with very low distortion. Mid-bass speakers with a unified chassis and a powerful EVC™ motor ensure excellent dynamics and high performance. The system is complemented by top frequency crossovers with MXR technology with a typical Morel design. The new Virtus 62 provides even greater versatility in system building and is available in 2 or 4 ohm impedance options. This allows you to maximize the performance of your amplification source, whether it's a factory head unit or an aftermarket amplifier. Choose the impedance that best suits your setup and unleash the full potential of your audio system.

Morel Virtus MT120N tweeters

An important part of the Morel Virtus speaker system are the high-resolution MT120N tweeters and a hand-coated silk dome with the patented Acuflex™ surface treatment. The tweeters offer excellent high-frequency performance with a very low level of distortion in a compact design. The 28 mm diameter aluminum coil together with the powerful neodymium magnet and low resonance frequency ensure high performance and minimal distortion. The small size of the tweeter allows for trouble-free mounting on the factory positions of the car with the option of surface or recessed installation. It also includes a beautiful lotus grille providing an elegant look suitable for modern vehicles. But it's not just about the impressive design. A specific pattern of holes in different shapes and diameters is designed to minimize the "corner" effect. This is a high-frequency peak caused by the resonance frequency of grilles with the same size holes, which we know in practically all loudspeakers.

Mid-bass speakers Morel Virtus MW6

At first glance, the unified basket with a non-traditional design that makes it possible to adapt to the limitations in the space of today's cars catches the eye. Inside you will find several exclusive Morel technologies. Of note is the powerful EVC™ motor with a 2.1" large voice coil. The EVC™ design moves the magnetic drive system inside the voice coil and eliminates stray magnetic flux by effectively directing all magnetic energy into the voice coil. The result is an ultra efficient and powerful system that is highly compact with efficient heat dissipation and reduced diaphragm distortion.Hexatech™ voice coil made of 100% aluminum honeycomb wire reduces air gaps in the coil winding, increasing efficiency by up to 20%.Includes a powerful dual magnet system ferrite magnet for high performance and excellent diaphragm control CAR Filter™ improves the acoustic load by controlling the air flow inside the speaker, which results in a greater control of the diaphragm movement for better bass dynamics composite cellulose fiber membrane ensures faithful mid-bass sound with minimal distortion.Protective grille is included.

Catalog number	VIRTUS 62.4
Brand	Morel
Links	Official web presentation
Speaker typeCoaxial speakers: Coaxial speakers are characterized by a so-called all-in-one design. The tweeter and mid-bass speaker are in one basket. The advantage is simpler assembly, but thanks to the connection or proximity of the bands in one speaker, the sound quality will usually be reduced. As a rule, in the middle of the mid-bass speaker, there is a tweeter whose voice coil works in the second air gap of the common magnetic circuit. The three-way coaxial speaker consists of a mid-bass speaker, a center speaker and a separate tweeter in the front on a special beam. Component Speakers: Component speakers are characterized by a division into individual frequency bands, treble + mid-bass + or. bass band. The individual speakers can be placed completely separately, which results in a better sound and acoustic performance. In the vast majority of cases of component speakers, an external crossover is also supplied, which divides the treble, middle / mid-bass, and into the three-band the bass band or allows setting the decibel level of the tweeter (e.g. +2 dB, 0 dB, -2 dB), steepness (e.g. 6dB/Oct. 12dB/Oct.) or active or bi-amp connection.	Component 2-way
RMS powerRMS speaker power is the constant power of the entire system, not just one speaker or one side. This is also the performance of continuous use of the speakers. If the RMS power is exceeded for a long time, the speakers may be irreversibly damaged!	140 W
Max. (maximum performancePeak performance , which the speaker can play for a moment (approx. 0.5 s), for example when hitting drums in a song. If the max power is exceeded, the speakers will usually be damaged!	300 W
Sensitivity (SPL 2.83V/1m)Sensitivity, sensitivity or efficiency of the speaker. Speaker sensitivity is given in decibels (dB) and simply put, the higher the value, the lower the demands on the amplifier's power. This is a defacto rating of how a speaker converts watts to sound. Sensitivity ratings are in noise level measured at 1 meter from the speaker using 1 W (watt of power) or using 2.83 volts at the source at 1 meter. A higher decibel level means the speaker is louder with less power. For every 3 dB increase in sensitivity, the speaker requires half the power to reproduce the same volume. For example, if an 88 dB speaker needs 100 Watts to produce a certain volume, then a speaker with a sensitivity of 91 dB needs only 50 Watts to reach the same volume.	88 dB
ImpedanceImpedance - measurement of electrical resistance. When buying speakers, it is important to make sure that the impedance matches the amplifier or car stereo you are using. Example: A 2 Ohm speaker cannot be connected to an amplifier that is only stable up to 4 Ohms! A 4 Ohm speaker can easily be used with an amplifier that is stable up to 2 Ohms. The most common speaker impedance today is 3 - 4 Ohm.	4 Ω
Frequency rangeThe ability of the speakers to play a signal from the lowest frequency to the highest, or the speaker's ability to faithfully reproduce sound in a specific frequency band. Professionally: In the frequency range from 40 to 16,000 Hz, the vast majority of fundamental and overtones (harmonics) of all musical instruments are found. We are interested in the course of the radiated sound pressure in this range of frequencies when the loudspeaker system is supplied with constant power. We call this course the frequency characteristic, which tells us the level of radiated sound pressure in decibels (dB) depending on the frequency. The frequency characteristic of a speaker or speaker system can be expressed most succinctly with a graph. Mostly, however, the frequency characteristic is indicated by indicating the maximum tolerance of the sound pressure in the given frequency range, e.g. 50 to 15,000 Hz -+ 6 dB. Since the frequency characteristics of loudspeakers and systems in general are quite uneven, some manufacturers do not even specify this maximum tolerance of sound pressure in decibels in their catalogs for reasons of prestige. Data impoverished in this way is unfortunately worthless. What is valid is that the manufacturer offers a speaker system with a frequency range of 30 to 20,000 Hz, if he is worried about stating the maximum unevenness of the sound pressure in this range, because he can have a tolerance of, for example, +- 20 dB. The unevenness or undulation of the frequency curve in good speaker systems for high-quality music performance should not exceed +-3 dB in the 80 to 12,000 Hz band and +-6 dB in the 40 to 16,000 Hz band. Greater unevenness already depletes or emphasizes certain tonal areas, which can cause audible or even disturbing distortion. The proportion between fundamental tones and higher harmonics also changes, thereby changing the color of the sound, and individual musical instruments as well as the entire musical image sound unnatural.	55 - 22000 Hz
The diameter of the mid-bass speakerWe state the diameter of the speaker as the diameter of the entire speaker, not including the mounts, when smaller speakers (87, 100, 130 mm) have extra mounts. Some speakers are oval and there the dimension is given in inches, always the shortest side to the longest side. One inch is approx. 2.5 cm.	165 mm
Installation depth of the mid-bass speakerThe installation depth of the speaker is measured from the bottom edge of the magnet to the bottom edge of the tin, plastic or cast speaker basket, or speaker bearing surfaces.	61 mm
Mid-woofer diaphragm materialThe material that was used for the speaker diaphragm. Don't be afraid of the paper, it surprisingly has a very natural and high-quality sound and, thanks to the surface treatment, it can withstand moisture without any problems.	Composite made of cellulose fibers
Tweeter dome diameterThe net diameter of the dome (diaphragm) of the tweeter.	28 mm
Tweeter dome materialThe shell material that was used in the manufacture of the tweeter.	Silk
The resonant frequency of the tweeter	1200 Hz
Frequency crossover included in the packageThe crossover is an important part of defacto all loudspeakers. A crossover usually contains different resistor values, coil sizes, and capacitor types that fundamentally modify the sound. We describe below what the turnouts are for. Component Speakers: A crossover is part of every quality component speaker system. Its task is to ensure the distribution of frequencies that the amplifier produces in the entire acoustic spectrum of frequencies so that each of the speakers receives only that part of the band that it can optimally play in terms of efficiency and minimal distortion. Coaxial speakers: In most cases, coaxial loudspeakers have a simple crossover (6dB/Oct.) formed by a capacitor at the tweeter.	Yes
Cover grids included in the packageOriginal cover grilles in speaker packaging.	Yes
Price forIf the price is for a pair, the package always includes 2 pieces of everything, e.g. 2x mid-bass, 2x tweeter and 2x crossover.	Pair