Honey COMBination Polishing Pad R DA-series Yellow Polish/One Step (75 x 90 mm)

Polishing Pad Honey COMBination Polishing Pad R DA-series Yellow Polish/One Step (75 x 90 mm)

The Honey COMBination Polishing Pad R DA-series Yellow Polish/One Step is a medium-soft polishing pad from the R-DA series, developed specifically for working with all types of paint, both hard and soft. It is also suitable for one-step paint polishing. This polishing pad is characterized by minimal abrasive performance while maintaining a very high level of final gloss.

Polishing Pads Honey COMBination R DA-series

The Honey COMBination R-DA series is a range of polishing pads made from closed-cell foam. The R-DA pads offer a wide range of hardness levels, allowing the pad to adapt to any type of polishing and surface. These features make the R-DA pads a unique range with a broad spectrum of uses. The good quality foam and precise craftsmanship translate to high durability. The thinness of the pads, flexibility enhancing work comfort, resistance to high temperatures, and a center hole that aids in precise pad placement on the carrier, make the R-DA series pads ideal for beginners.

Main Features

• Medium-soft polishing pad.
• Strong hook and loop fastener.
• Very decent durability.
• Polishing capabilities: medium to one-step.
• Purpose: orbital polisher.
• Polishing surface diameter: 90 mm.
• Hook and loop fastener diameter: 75 mm.
• Pad height: 25 mm.
• Color: yellow.
• Price per piece.

How to Care for Polishing Pads

• Caring for polishing pads is very important for their long lifespan and future polishing capabilities.
• During work, the temperature of the pad itself is very important for its lifespan, as it can heat up to high temperatures during paint polishing.
• If you polish paint for an extended period and frequently overheat the pad, you significantly shorten its lifespan.
• Therefore, monitor the temperature and if the pad is overheated, let it cool down for a while.
• High temperatures affect both the foam and the adhesive of the pad.
• The polishing pad needs frequent cleaning during the polishing process; otherwise, it will cease to function effectively.
• Once the polishing pad is clogged with polishing paste, it needs to be addressed.
• You can use a medium-soft brush and set the polisher to lower speeds, then brush out the old paste. Just hold the brush in your hand and let the polisher rotate the pad.
• Be careful not to throw the used paste onto the polished car paint during rotary cleaning.
• If you have an air compressor, you can use it to blow out the pad while the polisher is on.
• After a successful polishing process, the pad also needs to be prepared for future use.
• We recommend washing the polishing pad in a washing machine at 40°C using a detergent suitable for microfiber.
• Never wash pads together with towels or cloths!
• After washing, do not put the pads in a dryer; let them air dry on a drying towel with the polishing side down.
• If you don't have access to a washing machine, you can wash the pads by hand using an APC cleaner diluted at a ratio of 1:6.
• Polishing pads should be stored in a dry place away from direct sunlight, ideally in a closed, clean plastic box.

About Honey COMBination

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Polishing the paint Polishing discs
• Polishing discs and pastes HONEY COMBINATION