Honda Civic - installation of amplifier with DSP processor and sound tuning

Installation of a Zapco amplifier with a DSP processor into a Honda Civic, including measurement of the speakers' frequency response and detailed sound tuning on the DSP processor. The owner of this car already had component speakers German Maestro CS 6508 IV installed by us, which were powered only by the factory radio. After some time he decided to improve the sound by adding an amplifier and since the requirement was to get the maximum possible from the installed components, we could not choose any amplifier other than Zapco. It provides the selected components not only with sufficient power but above all with very high-quality sound. At the end of the installation, of course, it was time to measure the frequency response of all speakers and perform detailed sound tuning on the DSP processor. Using a calibrated microphone we measured all the deficiencies and obstacles of this vehicle and set spatial equalizer correction for each speaker in the car. We then set time alignment, levels, crossover points and other options that the DSP processor allows. The result is faithful sound tailored not only to this particular car but of course to the listener.