Graphene paint protection Ewocar Graphene 60 (50 ml)

Ewocar Graphene Paint Protection 60 (50 ml)

Ewocar Graphene 60 offers the highest surface hardness and scratch resistance. It uses an advanced graphene-containing formula that chemically bonds with the clear coat to form an ultra-dense, highly glossy protective layer. Once cured, it significantly increases surface hardness, making it the most scratch-resistant and durable protection in Ewocar's range of ceramic coatings. Modern water-based clear coats are often softer and more prone to micro-scratches. Even with gentle hand washing, fine swirl marks can appear over time. Ewocar Graphene Coating acts as a barrier that greatly reduces these effects and helps preserve a flawless appearance while resisting damage from oxidation, road salt, and acids from insects and bird droppings. The coating creates an extremely smooth surface that actively repels dirt, water, dust and other contaminants. Thanks to its self-cleaning properties, water beads and runs off immediately, carrying dirt away and reducing the need for frequent body washes. The main difference compared to ordinary coatings is the long-lasting hydrophobic effect. Most protections gradually lose their water-repellent properties due to UV exposure and environmental conditions, whereas Ewocar Graphene Coating maintains this property for years. Graphene technology helps stabilize and strengthen the coating structure, preventing premature degradation and preserving an easy-to-clean, glossy surface for a long time. The result is treated surfaces that stay cleaner longer, resist staining and provide long-lasting gloss with minimal maintenance—ideal for those who demand top performance, long durability and a flawless look on every drive.

Main features

• Ewocar’s most durable graphene-containing protection — maximum surface hardness and scratch resistance.
• Acts as a protective barrier against micro-scratches, oxidation, road salt and acids from insects.
• Creates an extremely smooth, self-cleaning surface that repels dirt, water, dust and other contaminants.
• Long-lasting hydrophobic effect that withstands UV exposure and weathering for years.
• Keeps surfaces cleaner longer, resists staining and provides lasting gloss with minimal maintenance.
• Lasts up to 5 years.
• Volume 50 ml.

Instructions for use

• Never work in direct sunlight.
• First, wash the car thoroughly with a quality car shampoo.
• Always decontaminate the paint from fallout rust and tar.
• If necessary, perform mechanical decontamination using clay.
• For the clay procedure, see the article titled "Waxing your car and its preparation".
• After clay decontamination, wash the car again with shampoo, rinse with water if needed and dry thoroughly.
• Ideally, polish the paint using an appropriate polishing compound.
• After polishing, the paint must be thoroughly degreased, for example with Ewocar Degreaser Pre-coating Cleaner.
• Now the paint is ready for the coating application.
• Wear protective rubber gloves before application.
• Apply the coating to an applicator block with an attached applicator cloth.
• Then apply the ceramic coating to the vehicle’s paint.
• Apply section by section, not to the entire car at once (for example, a door or 1/4 of the hood).
• Let it flash for 1 to 3 minutes and then buff off with a short-pile microfiber towel (e.g., Ewocar Basic320).
• Use multiple towels; for one car we recommend using around 4 towels. It is important that each towel is dry and clean to achieve a flawless result.
• After application, ideally keep the car in a warm, dry place for 24 hours to allow the coating to cure.
• Do not wash the car for two weeks after application; rain does not harm the coating.
• Subsequent maintenance after applying the paint protection is very simple: just wash the vehicle with a quality shampoo, for example Carbon Collective Lusso 2.0.

About the Ewocar brand

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Paint protection Ceramic protection
• Car cosmetics EWOCAR