Ewocar Hydro36 (30 ml) Full Set

Ewocar Hydro36 Ceramic Paint Protection (30 ml) Full Set

Top-tier Ewocar Hydro36 paint protection is a highly durable ceramic coating designed not only for professionals but also for detailing enthusiasts. It shares the most important features with the advanced EwocarPRO60 ceramic — offering 9H hardness, extreme hydrophobic properties and gloss, chemical resistance from pH 2 to 12 and even easier application in a single layer. The surface after applying Ewocar Hydro36 is noticeably smoother than PRO60 and there is no need to apply a second boost layer. The main difference is a reduced protection period from 60 to 36 months, which still represents an above-standard long-lasting durability.

Main features

• Ceramic paint protection.
• Provides top-level protection against acid rain, bird droppings, UV radiation, dirt and scratches.
• Treated surfaces become water-repellent, easy to maintain and retain a high gloss over time.
• Two-layer protection — the base layer adds flexibility, the top layer ensures maximum durability.
• Safe coating for painted bodywork, painted plastic parts and bumpers.
• If applied correctly, protects the surface for up to 3 years.
• Uses advanced nanotechnology to create an extremely durable yet flexible protective layer.
• Professional product with exceptional results for maximum paint protection.
• Hardness 9H.
• Chemical resistance pH 2 to 12.
• Consumption approx. 30 ml/car.
• Thickness 1000 to 1200 nm.
• Volume 30 ml.
• Includes applicator and a microfiber cloth in the package.

Instructions for use

• Never work in direct sunlight.
• First, thoroughly wash the car with a quality car shampoo.
• Always decontaminate the paint from iron fallout and tar.
• If necessary, perform mechanical decontamination using a clay bar (clay bar).
• After claying, wash the car again with shampoo, rinse with water if needed and dry thoroughly.
• Ideally, polish the paint before application.
• After polishing, degrease the paint thoroughly, for example with Ewocar Degreaser Pre-coating Cleaner.
• Now the paint is ready for the ceramic coating application.
• Put on protective rubber gloves before application.
• Apply the ceramic coating onto an applicator block fitted with an application cloth.
• Gently apply the ceramic coating to the vehicle’s paint using crosshatch motions.
• Apply the coating in sections, not to the whole car at once (e.g. a door or a quarter of the hood).
• Let it flash for 30 to 90 seconds, then buff off with a short-pile microfiber cloth (e.g. Ewocar Basic320).
• Use multiple cloths; for one car we recommend using up to four towels — it’s important each cloth is dry and clean to avoid defects.
• After application, ideally leave the car in a warm, dry place for 24 hours to allow the coating to cure.
• Protect the car from sun and dust.
• Do not wash the car for two weeks after application; rain does not harm the coating.
• Post-application maintenance is very simple — wash the vehicle with a quality shampoo, for example Carbon Collective Lusso 2.0.

About the Ewocar brand

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Paint protection Ceramic protection
• Car cosmetics EWOCAR