Ceramic paint protection Koch Chemie Ceramic Body Cb0.01 (30 ml)

Ceramic paint protection Koch Chemie Ceramic Body Cb0.01 (30 ml)

High-performance ceramic paint protection that creates an extremely hard, hydrophobic, and durable coating. Provides long-term protection against dirt, UV radiation, limescale, acid rain, and scratches. Thanks to its unique technology, it significantly increases gloss and color depth. The very thin protective layer permanently bonds with the surface through a chemical reaction. Ceramic Body Cb0.01 creates very good properties for droplet clustering (lotus effect). Thanks to its Easy-to-Clean features, the treated surface can be gently and easily cleaned even when washing by hand. The protective layer remains intact even after using acidic and alkaline cleaning agents. The hardened ceramic protection protects the paintwork much longer from environmental influences such as oxidation, salt, acids, and insects. Ceramic Body Cb0.01 thus contributes significantly to maintaining or increasing the value of the vehicle. The service life is up to 36 months, depending on the load. Ceramic Body Cb0.01 can be applied in two layers.

Main characteristics

• Ceramic paint protection.
• High hardness and resistance to scratches and chemical influences.
• Strong hydrophobic effect - water and dirt easily run off the surface.
• Enhances the shine and depth of the paint.
• Resistance to UV radiation and weathering.
• Suitable for all types of paint, including new and older vehicles.
• Application in very small quantities with a long coating life of up to 3 years.

How to use

• Never work in direct sunlight.
• First, wash the car thoroughly with a high-quality car shampoo.
• Always decontaminate the paintwork from rust and tar.
• If necessary, perform mechanical decontamination of the paintwork using clay.
• You can read about the claying process in the article "Car waxing and preparation." 
• After claying, wash the car again with shampoo, or rinse it with water and dry it thoroughly.
• If the paintwork is scratched, it is necessary to perform machine polishing of the paintwork.
• Wear protective rubber gloves before application.
• Drip the ceramic coating onto the application cube, to which the application cloth is attached.
• Then apply the ceramic coating to the vehicle's paintwork using crosswise movements.
• Always apply in sections, not to the entire car, e.g., doors or 1/4 of the hood.
• Leave to dry for 5 to 8 minutes and then polish with a short-pile microfiber cloth.
• Use several cloths; we recommend using up to 4 cloths per car. It is important to have a dry and clean cloth to ensure a flawless result.
• After application, we recommend leaving the car in a warm and dry place for 24 hours to allow the coating to harden.
• We recommend not washing the car for 2 weeks after application; rain will not damage the coating.
• Subsequent maintenance of the car after ceramic application is very simple; just wash the vehicle with a high-quality shampoo, such as Carbon Collective Lusso 2.0.

About the brand

Koch Chemie is a leading German manufacturer of cleaning and vehicle care products for a large part of the automotive industry. Koch Chemie products are used by renowned car manufacturers (Mercedes-Benz, BMW, Volkswagen and others) as their own original products. The high quality of the products has proven itself in everyday practice in car showrooms, detailing centers, car washes and among customers themselves, who like to take care of their vehicles. The Koch Chemie brand was founded in 1968 in the German city of Unna.

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Paint protection Ceramic protection
• German traditional car cosmetics KOCH CHEMIE