Steering wheel control adapter Fiat Ducato (21->)

Steering wheel control adapter for Fiat Ducato (21->) 240070SFA021

Steering wheel control adapter for Fiat Ducato from 2021 allows you to retain the function of the original steering wheel buttons when replacing the factory radio with an aftermarket car stereo. It also serves to connect the car stereo via the ISO connector and transmits important analog signals required for proper installation. The adapter is intended for the Fiat Ducato facelift from 4/2021, specifically for vehicles without a factory radio that have factory wiring prepared for a radio with an ISO connector. The manufacturer lists compatibility for example with Sony, Kenwood, JVC, Pioneer, Clarion, Alpine and Zenec car stereos. For a specific brand of car stereo it is necessary to add the appropriate connection cable.

Retaining steering wheel controls

After installing the adapter, the standard buttons of the original multifunction steering wheel remain functional. However, it is important to note that the adapter does not support steering wheel buttons intended for controlling a hands‑free kit.

Plug & Play installation

The adapter uses the vehicle's original wiring and allows installation without unnecessary interventions in the electrical system. In addition to steering wheel control, it also provides several important output signals that can be used when installing a modern car stereo or multimedia unit.

Main advantages

• Retains control of the aftermarket car stereo from the original steering wheel.
• Designed for Fiat Ducato facelift from 4/2021.
• Suitable for vehicles without a factory radio that are prepared for an ISO connector.
• Plug & Play connection using the vehicle's original wiring.
• Provides +12 V ignition-switched signal.
• Provides vehicle speed pulse.
• Provides reverse gear signal.
• Provides information about the engaged handbrake.
• Compatible with car stereos from Sony, Kenwood, JVC, Pioneer, Clarion, Alpine and Zenec.
• An appropriate connection cable can be added for a specific brand of car stereo.

Compatibility

• Fiat Ducato III Facelift 2 [X290], Series 8: 2021–2024.
• Fiat Ducato facelift from 4/2021.
• Only for vehicles without an installed factory radio.
• The vehicle must be equipped with factory wiring for a radio with an ISO connector.

Supported functions

• Steering wheel control.
• +12 V after ignition on, terminal 15.
• Vehicle speed pulse.
• Reverse gear signal.
• Handbrake engaged signal.
• ISO car stereo connection.

Important notice

To connect the adapter to a specific brand of aftermarket car stereo, it is necessary to also order the corresponding connection cable for that brand of car stereo. The adapter does not support multifunction steering wheel buttons intended for controlling hands‑free.

Technical specifications

• Type: Steering wheel control adapter.
• Intended for: Fiat Ducato from 2021.
• Car stereo connection: ISO.
• Plug & Play: Yes.
• Steering wheel control: Yes.
• Vehicle speed pulse output: Yes.
• Output +12 V when reverse engaged: Yes.
• Handbrake signal: Yes.
• +12 V after ignition on: Yes.
• Support for handsfree buttons on the steering wheel: No.

Evaluation

• Car radios and accessories Steering wheel button control adapters Fiat steering wheel adapters Fiat Ducato steering wheel adapters
• CONNECTS2