Sealant Stjärnagloss Glatt (5 l)
More about the product
- You can return the goods to us within 14 days
Stjärnagloss Glatt
Stjärnagloss Glatt is a fast protective rinse designed for application to a wet car after washing. The manufacturer describes it as a water-repellent product that helps protect the paint quickly and effectively, while increasing gloss and promoting faster shedding of water and dirt from the surface. This makes it an ideal choice for anyone who wants to add a simple protective step to regular car washing without the complicated application of traditional wax or sealant.
A major advantage of Glatt is its simple and quick use. It is applied to the wet surface after washing and then rinsed off again with water, ideally using a pressure washer that activates the hydrophobic layer. The result is a water-repellent effect that helps minimize water retention and contamination on the surface, thereby making future washing easier and reducing the formation of water spots. The manufacturer also warns that you achieve the best result when applying panel by panel to avoid a dried or too-thick layer.
Stjärnagloss Glatt is also suitable for windows, but the manufacturer does not recommend using it on the windshield due to a possible reaction with older protective layers and a resulting impairment of visibility. According to the manufacturer the hydrophobic effect lasts several weeks depending on weather, washing frequency and exposure to contaminants. For the best final result it is recommended to dry the car after application with a soft microfiber cloth to avoid streaks or marks.
Hlavní vlastnosti
- Protective rinse for quick vehicle protection after washing.
- Increases paint gloss.
- Creates a hydrophobic, water-repellent layer.
- Helps water and dirt run off the surface faster.
- Helps minimize the formation of water spots.
- Makes future washing of the car easier.
- Can be used on windows, but not on the windshield.
- Hydrophobic effect lasts several weeks.
Návod jak používat
- First wash the car, ideally using the two-bucket method, and rinse thoroughly.
- Apply Glatt to the still-wet surface.
- For best results work panel by panel.
- Do not leave the product on the surface for a long time.
- Immediately after application rinse the panel again.
- Use a pressure washer to activate the hydrophobic layer.
- After finishing dry the car with a soft microfiber cloth to prevent streaks and marks.
- Do not overuse the product, as excessive application can cause streaking.
- Do not use in direct sunlight or on a heated panel.
O značce
| Catalog number | STGT50C |
| Brand | Stjarnagloss |
| Links | Official web presentation |











