My account

OEM enclosure Basser 10" for Toyota Avensis kombi

OEM box for 10" subwoofer for Toyota Avensis kombi (09 ->)
More about the product
We will help you with your purchase
  • You can return the goods to us within 14 days
OEM enclosure Basser 10" for Toyota Avensis kombi

OEM enclosure Basser 10" for Toyota Avensis kombi

An OEM enclosure is a custom-made box that fits precisely into the side panel of the boot or into a space intended for hidden installation in the vehicle. OEM enclosures are the ideal compromise between power, sound and boot space. Our range includes a wide selection of OEM boxes for the most common vehicle models. This enclosure is made for the Toyota Avensis kombi (2009 and newer). Installing the OEM box requires moderate skill: it needs to be fixed at the rear to one of the mounting points in the car, or a bracket must be made, e.g. from MDF or a wooden board.

Technical parameters of the OEM enclosure for Toyota Avensis kombi

  • Type: sealed enclosure.
  • Volume: 15 l.
  • Diameter: for 25 cm (10") subwoofer.
  • Location: right wheel arch.
  • Mounting depth for subwoofer: 156 mm.
  • The enclosure is covered with black carpet and fitted with a terminal for connecting the wiring.
Catalog numberOBGL.TOYOTA.01R
BrandBasser
LinksOfficial web presentation
Loudspeaker typeEmpty enclosures are most often bass-reflex or closed constructions. Closed enclosure
Subwoofer hole sizeHole for a given subwoofer diameter category. For a 300mm subwoofer, the hole is most often approx. 28.3 cm. The mounting diameters of subwoofers are usually standardized, so there is no need to adjust anything. 25cm (10")
Loudspeaker volumeThe volume of an empty enclosure is usually given as the total volume including the walls of the box. Some manufacturers also state the net volume, i.e. the pure volume of air in the box after subtracting everything else. We then state the net volume in brackets with the description "net". 15 l
What is the baffle made of?Subwoofer enclosures are usually made of 18-22 mm MDF board or pressed chipboard. Due to its higher strength, MDF board is a better material than ordinary chipboard. MDF
Connection terminal typeThe connection terminal is most often from the back of the sound box, but sometimes also from the side. It is mostly a plastic terminal with spring clamps for the speaker cable. Spring clamps
CoverThe vast majority of the enclosure is covered with either black or anthracite carpet. Carpet
Cover colorColored carpet or leather upholstery. Black highlight
OtherRecess 272 mm

Evaluation

Overall rating
0 %
No one has rated the product yet
0×
0×
0×
0×
0×
Rate the product:
ask us
We will only use your data to send you a reply.