My account

OEM enclosure Basser 10" for Mercedes-Benz E-Class Coupe

OEM box for 10\" subwoofers for Mercedes E-Class (W213) Coupe (16->)
More about the product
The sale is over
Please choose similar goods from the same category
Mercedes-Benz
OEM enclosure Basser 10" for Mercedes-Benz E-Class Coupe
The sale is over

OEM enclosure Basser 10\" for Mercedes-Benz E-Class Coupe

OEM enclosure is a custom-made box that fits precisely into the side panel of the trunk or into a space intended for hidden installation in the vehicle. OEM enclosures are the ideal compromise of power, sound and trunk space. In our range you can find an extensive selection of OEM boxes for the most common vehicle models. This enclosure is made for the vehicle Mercedes-Benz E-Class Coupe (W213) (2016 ->). Installing the OEM box requires intermediate skill; it needs to be secured from the rear to one of the mounting points in the car, or you can make a bracket, for example from MDF or a wooden board.

Technical specifications of the OEM enclosure for Mercedes-Benz E-Class Coupe

  • Type: sealed enclosure.
  • Volume: 2 x 17 l.
  • Diameter: for 25 cm (10\") subwoofers.
  • Location: trunk.
  • Mounting depth for subwoofer: 170 mm.
  • The enclosure is covered with black carpet and fitted with a terminal for cable connection.
Catalog numberOBGL.MERCEDES.12
BrandBasser
Loudspeaker typeEmpty enclosures are most often bass-reflex or closed constructions. Closed enclosure
Subwoofer hole sizeHole for a given subwoofer diameter category. For a 300mm subwoofer, the hole is most often approx. 28.3 cm. The mounting diameters of subwoofers are usually standardized, so there is no need to adjust anything. 25cm (10")
Loudspeaker volumeThe volume of an empty enclosure is usually given as the total volume including the walls of the box. Some manufacturers also state the net volume, i.e. the pure volume of air in the box after subtracting everything else. We then state the net volume in brackets with the description "net". 2x 17 l
What is the baffle made of?Subwoofer enclosures are usually made of 18-22 mm MDF board or pressed chipboard. Due to its higher strength, MDF board is a better material than ordinary chipboard. MDF
Connection terminal typeThe connection terminal is most often from the back of the sound box, but sometimes also from the side. It is mostly a plastic terminal with spring clamps for the speaker cable. Plastic screw terminal
CoverThe vast majority of the enclosure is covered with either black or anthracite carpet. Leatherette
Cover colorColored carpet or leather upholstery. Black

Evaluation

Overall rating
0 %
No one has rated the product yet
0×
0×
0×
0×
0×
Rate the product:
ask us
We will only use your data to send you a reply.