My account

OEM Basser 10" soundbar for Toyota Corolla combi (2018 ->)

OEM box for 10" subwoofer for Toyota Corolla combi (18->)
More about the product
We will help you with your purchase
  • You can return the goods to us within 14 days
OEM Basser 10" soundbar for Toyota Corolla combi (2018 ->)
New

OEM enclosure Basser 10" for Toyota Corolla combi (2018 ->)

OEM enclosure is a custom-made box that fits precisely into the side panel of the trunk or into a location intended for hidden installation in the vehicle. OEM enclosures are an ideal compromise of performance, sound and trunk space. In our range you can find a wide selection of OEM boxes for the most common vehicle models. This enclosure is made for the car Toyota Corolla combi (2018 ->). Installing the OEM box requires moderate skill; it should be secured from the rear to one of the vehicle's mounting points, or you can create a mount yourself, e.g. from MDF or a wooden board.

Technical specifications of the OEM enclosure for Toyota Corolla combi (2018 ->)

  • Type: sealed enclosure.
  • Volume: 17 l.
  • Diameter: for 25 cm (10") subwoofer.
  • Location: right wheel arch.
  • Mounting depth for subwoofer: 150 mm.
  • The enclosure is covered with black carpet and fitted with a terminal for wiring connection.
Catalog numberOBGL.TOYOTA.11
BrandBasser
LinksOfficial web presentation
Loudspeaker typeEmpty enclosures are most often bass-reflex or closed constructions. Sealed enclosure
Subwoofer hole sizeHole for a given subwoofer diameter category. For a 300mm subwoofer, the hole is most often approx. 28.3 cm. The mounting diameters of subwoofers are usually standardized, so there is no need to adjust anything. 25 cm (10\")
Loudspeaker volumeThe volume of an empty enclosure is usually given as the total volume including the walls of the box. Some manufacturers also state the net volume, i.e. the pure volume of air in the box after subtracting everything else. We then state the net volume in brackets with the description "net". 17 l
What is the baffle made of?Subwoofer enclosures are usually made of 18-22 mm MDF board or pressed chipboard. Due to its higher strength, MDF board is a better material than ordinary chipboard. MDF
Connection terminal typeThe connection terminal is most often from the back of the sound box, but sometimes also from the side. It is mostly a plastic terminal with spring clamps for the speaker cable. Plastic screw terminal
CoverThe vast majority of the enclosure is covered with either black or anthracite carpet. Carpet
Cover colorColored carpet or leather upholstery. Black melange
OtherCutout 275 mm

Evaluation

Overall rating
0 %
No one has rated the product yet
Rate the product:
ask us
We will only use your data to send you a reply.