Nanotech-Europe diesel additive - summer edition (500 ml)
More about the product
- You can return the goods to us within 14 days
Diesel additive Nanotech-Europe - summer edition (500 ml)
NANOTECH diesel additive – summer edition is a multifunctional additive intended for regular use in diesel fuel at temperatures above 10 °C. It helps improve the lubricating and cleaning properties of the fuel, protects the fuel system from wear and reduces the negative effects of bio-components in diesel. The manufacturer also states effects against carbon deposits, corrosion and sludge formation. With regular use, the additive can contribute to a cleaner fuel system and better protection of key components such as injectors, the fuel pump or valves. The manufacturer also reports reduced fuel consumption and emissions.
Protection of the fuel system and engine
The additive increases the lubricity of diesel fuel, helping to reduce wear on the fuel pump, injectors and valves. At the same time it cleans the fuel path and helps remove carbon deposits from pistons and valves. The manufacturer also states protection against corrosion and reduced sludge formation.
Summer formulation for temperatures above 10 °C
The summer edition is intended for use at ambient temperatures above 10 °C. For proper mixing the manufacturer recommends shaking the bottle well before use and pouring the required amount of additive into the tank before refuelling.
Key features
- Increases lubricity of diesel fuel.
- Helps protect injectors, fuel pump and valves from wear.
- Reduces the negative impact of cold starts.
- Cleans the fuel system.
- Helps remove carbon deposits from pistons and valves.
- Protects the fuel system against corrosion.
- Helps limit sludge formation.
- Contributes to extended engine life.
- The manufacturer states reduced fuel consumption and harmful emissions.
- Easy dosing at a ratio of 1 : 500.
- Intended for use at temperatures above 10 °C.
Dosing
Dilution ratio: 1 : 500 (small deviations are acceptable)
- 10 ml of additive for 5 litres of diesel.
- 40 ml of additive for 20 litres of diesel.
- 50 ml of additive for 25 litres of diesel.
- 100 ml of additive for 50 litres of diesel.
- A 500 ml bottle is sufficient for approximately 250 litres of diesel.
Instructions for use
- SHAKE the additive WELL before use.
- Pour it into the tank before refuelling - this helps it mix better with the fuel.
- Then top up the tank as usual.
- Use regularly to maintain a clean fuel system and maximum effectiveness.
Storage and safety
Store the additive in the original container at temperatures between 0 and 40 °C, away from direct sunlight, frost and moisture. After opening the bottle must be stored upright, as the manufacturer warns that the cap seal may not be fully tight when the bottle is laid on its side. The product is classified as a flammable substance of class II and the manufacturer warns that it should not be extinguished with water.
About the brand
Nanotech Europe is a progressive brand specialising in modern automotive additives that use advanced nanoparticle technologies for maximum engine protection and performance. Nanotech Europe products are developed to work efficiently in passenger cars as well as commercial and racing engines. Their additives help extend engine life, improve operation and reduce unwanted wear of important parts. Nanotech Europe oil additives provide strong protection against wear of bearings, pistons and bushings, significantly reduce friction and thermal load on the engine and improve the lubricating properties of the oil. As a result, the engine runs quieter, with less power loss and longer service intervals. Fuel additives for diesel and petrol help keep the fuel system clean - from pumps through injectors to the combustion chamber. They clean deposits, prevent corrosion and improve fuel combustion, which leads to easier starts, smoother acceleration, lower fuel consumption and reduced exhaust emissions.
| Catalog number | ACSD500 |
| Brand | Nanotech |
| Links | Official web presentation |