Hydrophobic car body sealant Carbon Collective Hybrid Coating 2.0 Pink (500 ml)

Carbon Collective Hybrid Coating

Carbon Collective Hybrid Coating is a highly concentrated, ultra-hydrophobic sealant for bodywork that represents a modern way to protect your vehicle. Thanks to its innovative formula it can be applied very quickly and easily by spraying and rinsing, immediately creating a strong protective layer. This product effectively repels water and dirt and gives the paint a deep gloss with durability exceeding three months.

This innovative sealant was designed to maximally simplify and speed up subsequent vehicle maintenance after washing. Unlike traditional waxes, whose application and buffing require a lot of time and effort, this product is applied directly to the wet surface immediately after washing. It is activated by a strong jet of water from a pressure washer, meaning you obtain protection comparable to classic sealants within minutes. It is fully safe for all exterior surfaces, so you can confidently apply it not only to painted bodywork but also to glass, exterior plastics and alloy wheels, to which it adds high slip and prevents road grime from sticking.

One of the greatest advantages of this product is its extremely concentrated composition, which allows dilution up to 1:10. From a single bottle you can prepare a large amount of effective product, making it a highly economical solution for both detailing enthusiasts and professional studios. The new improved formula brings significantly stronger chemical bonds and higher chemical resistance, extending the overall life of the protection. Faster activation on the surface and increased foaming during application make it easier to achieve an even application without streaking. The product also features a specific fragrance that accompanies the application process.

Thanks to its versatility the sealant offers several different application methods to suit your preferences and equipment. You can apply it traditionally with a hand spray, through a foamer in combination with snow foam, add a few drops directly to a wet wash mitt or pour it into the shampoo bucket for regular maintenance of existing protection. After rinsing with water you will immediately notice extreme water drainage, which greatly simplifies and speeds up subsequent drying. Water literally rolls off the paint, minimizing the risk of scratches during towel drying and keeping the vehicle clean for much longer.

Main features

• A highly concentrated hydrophobic sealant that, when applied to a wet surface and rinsed, forms a protective barrier repelling water and dirt.
• Long-lasting protection with durability of more than 3 months.
• High concentration allowing dilution up to 1:10.
• Suitable for application on paint, glass, wheels and external plastics.
• Increased chemical resistance and stronger bonding to the surface compared to the previous version.
• Quick activation upon contact with water and increased foaming for easier application.
• New fragrance enhancing the application process.
• Multiple application methods including manual spray, foamer or addition to the wash bucket.

How to use

• Thoroughly wash the vehicle in the usual way.
• Work in the shade and ensure the bodywork is cool to the touch.
• Dilute the product according to the chosen application method: for hand spray mix 50 ml product with 450 ml water (or 100 ml product with 900 ml water); for a foamer use 100 ml product and 400 ml water.
• Apply evenly to the wet surface of the bodywork.
• When applying in warm air or on dark vehicles, work section by section.
• Let it dwell for 30 seconds to 1 minute and do not allow the product to dry on the surface.
• Rinse thoroughly with a strong jet of water, ideally using a pressure washer, which activates the protective layer.
• To achieve higher resistance and longer lifespan you can repeat the entire application process.
• Dry the bodywork afterwards; we recommend using quality Purestar drying towels.
• Dilution options for manual spray: 50 ml product with 450 ml water for a 500 ml bottle, or 100 ml product with 900 ml water for a 1 l bottle.
• Dilution options for foamer use: 100 ml product with 400 ml water.
• Direct application option: apply a few drops directly to a wet wash mitt and apply section by section to the vehicle.
• Bucket maintenance: add 50 ml product directly to the shampoo bucket during regular washing.

About the brand

Carbon Collective is a premium British brand of car care, ceramic protections and detailing accessories. The brand was born from the practice of detailers themselves. It originally started as a team of product testers who were not satisfied with what the market offered and therefore decided to develop their own solutions. From the very beginning it has followed the idea ‘by detailers, for detailers’ — products designed by people who truly understand detailing. In the Carbon Collective range you will find top ceramic coatings, car shampoos, cleaners, sealants, glass cleaners, wheel and interior care and premium detailing accessories. The brand prides itself on high performance, easy use, modern technologies and long-term surface protection. Its products are popular among professional detailers and demanding car enthusiasts who want to achieve perfect results without compromise.

Evaluation

• Car cosmetics Car exterior maintenance Paint protection Sealants
• CARBON COLLECTIVE