Gyeon Q2M Bathe+ car shampoo (400 ml)

Gyeon Q2M Bathe+ Ceramic Car Shampoo

Gyeon Q²M Bathe+ is the world's first pH-neutral shampoo containing SiO₂, a so-called ceramic car shampoo. When washing, it leaves a strong hydrophobic layer that repels water and dirt and delays the need for the next contact wash. Washing itself is a real pleasure: the shampoo is highly lubricating and has the characteristic pleasant Gyeon scent. When it comes to "all-in-one" products, Q²M Bathe+ can be called a truly revolutionary car shampoo! A single wash gives an amazing hydrophobic effect and easier maintenance for several weeks. It is a phenomenal solution for winter when washing is more difficult, as boosting self-cleaning abilities improves maintenance comfort. Gyeon Q²M Bathe+ is perfectly safe on all surfaces such as paint, ALU wheels, glass and plastics. It provides immediate protection to unprotected surfaces or boosts an existing ceramic coating already on those surfaces. It can also be used on existing natural waxes or sealants, improving their durability and increasing gloss. The active SiO₂ ingredient in the shampoo provides real protection you can see with every wash, and unlike many competing shampoos, the added hydrophobicity and self-cleaning ability remain, keeping your car cleaner for longer.

Main features

• Ceramic car shampoo, one of the best on the market.
• Highly lubricating.
• Three usage options – shampoo, active foam and application using a wash mitt.
• Concentrate - recommended dilution 1:500.
• Pleasant scent.
• Safe for all exterior bodywork surfaces.
• Extends the life of previously applied ceramic coatings.
• Provides a hydrophobic layer and increases gloss.
• Consumption per car: 15 to 20 ml.
• SiO₂ content: < 5%.
• pH value: 6.
• Duration: up to 8 weeks.
• Durability rating: 3/5.
• Final gloss: 4/5.
• Beading: 4/5.
• Self-cleaning ability: 4/5.

Usage - classic method

• Before you start washing, watch the original Gyeon YouTube video.
• Never wash the car in direct sunlight; ideally wash in the shade or during evening or early morning hours.
• The car's bodywork must be cool to the touch.
• First rinse the car with high-pressure water to remove coarse contamination from the bodywork.
• Dilute the shampoo at a ratio of 1:500 (20 ml in 10 liters of water). We recommend using warm water.
• Use a hose with running water to create foam in the bucket.
• Then always wash the car from top to bottom, preferably with a wash mitt.
• Wash the bodywork with straight strokes, not circular, and do not press too hard on the wash mitt.
• Finally, rinse the car with a stronger stream of water and dry with a quality drying towel (e.g. Purestar Duplex Drying Towel Gray L).

Usage - as active foam

• Dilute the shampoo at a ratio of 15 to 20 ml of product to 500 ml of water.
• We recommend using warm water.
• Before applying active foam the car must already be washed.
• Spray the active foam over the whole vehicle and rinse immediately.
• Then dry with a quality drying towel (e.g. Purestar Duplex Drying Towel Gray L).

Usage - application using a wash mitt

• Wash the bodywork in the usual way using a regular, clean car shampoo.
• Then use a quality microfiber wash mitt (e.g. Purestar Double Twist Wash Mitt) and add a few drops of Bathe+ into the mitt.
• Work with straight strokes, panel by panel.
• This way you apply the ceramic shampoo onto the paint.
• After application rinse and dry the bodywork again.
• Never allow the product to dry on the surface!
• Work only on a cool bodywork and in the shade.

About the brand

Evaluation

• Car cosmetics Car exterior maintenance Car wash Car shampoos
• GYEON car care products