Connection cable 42CTCHINAHULEAD-0

Connection cable for steering wheel control adapter 42CTCHINAHULEAD-0

• Connection (patch) cable for connecting Blaupunkt, China HU, ESX, Kenwood 2020 ->, Snooper and XZent aftermarket head units to ACV steering wheel control adapter (LFB/SWC).
• Different head unit manufacturers use different types of control inputs: single-wire, two- or multi-wire (Key1/Key2/GND) or 3.5 mm jack – the exact version is specified in the manual (BDA) of the specific head unit.
• All required connection wires must be connected before connecting the interface to the vehicle.
• For some units, it is necessary to “learn” (remap) steering wheel button functions in the unit menu according to the manufacturer’s BDA instructions.
• Always test correct functionality before final installation.

Warning

• Connection: 12 pin Microfit → Key1 / Key2 / GND.
• Wire colors: white = Key2, brown = Key1, black = GND.
• LFB connection cable for ACV 42s-xxxxx interface and 43u-xxxx Infodapter.
• Atoto aftermarket units are not supported.
• Must be ordered together with the appropriate steering wheel control adapter.
• How steering wheel adapters and patch cables work can be found via the referenced link.

Designed for head units:

• Blaupunkt 2010 -> – Key1 / Key2 / (GND) connection.
• China HU – Key1 / Key2 / (GND) connection.
• ESX – Key1 / Key2 connection.
• Kenwood 2020 -> – Key1 / Key2 / GND connection.
• Snooper – Key1 / Key2 connection.
• XZent – Key1 / Key2 / GND connection.

Evaluation

• Car radios and accessories Steering wheel button control adapters Connecting cables to adapters for steering wheel button control
• ACV