Connection cable 42C-3414124

Connection cable for steering wheel control adapter 42C-3414124

• Connection (patch) cable for connecting Blaupunkt, China HU, ESX, Kenwood (2020>), Snooper and XZent aftermarket head units to Speedsignal steering wheel control adapter (LFB/SWC).
• Head unit manufacturers use different types of control inputs: single-wire, two- or multi-wire (Key1/Key2) or 3.5 mm jack input – the exact version is specified in the manual (BDA) of the specific head unit.
• All connections must be made before connecting the interface to the vehicle.
• For some units, it is necessary to “learn” (remap) steering wheel button functions in the unit menu according to the manufacturer’s BDA instructions.
• Always test correct functionality before final installation.

Warning

• Connection: 12 pin Microfit → Key1 / Key2 outputs.
• LFB connection cable for Speedsignal 42b-xxxxxxx interface.
• No bridge / no resistor.
• Atoto aftermarket units are not supported.
• Must be ordered together with the appropriate steering wheel control adapter.
• How steering wheel adapters and patch cables work can be found via the referenced link.

Designed for head units:

• Blaupunkt 2010-> – 2/3 wire input (Key1 / Key2).
• China HU – 2/3 wire input (Key1 / Key2).
• ESX – 2/3 wire input (Key1 / Key2).
• Kenwood 2020-> – 2/3 wire input (Key1 / Key2).
• Snooper – 2/3 wire input (Key1 / Key2).
• XZent – 2/3 wire input (Key1 / Key2).

Evaluation

• Car radios and accessories Steering wheel button control adapters Connecting cables to adapters for steering wheel button control
• ACV