Ceramic protection for ALU wheels Koch Chemie Ceramic Rims Cr0.01 (30 ml)

Name: Ceramic protection for ALU wheels Koch Chemie Ceramic Rims Cr0.01 (30 ml)
Brand: Koch Chemie
Price: 76.75 EUR
Availability: InStock

Be the first to rate the product

Add to FavoritesRemove from favourites

ceramic protection for ALU discs, service life 1 year, 30 ml
More about the product

We will help you with your purchase

You can return the goods to us within 14 days

Ceramic protection for ALU wheels Koch Chemie Ceramic Rims Cr0.01 (30 ml)

New

A better product is within reach

Gyeon Q2 Rim EVO (30ml) for 52,90 EUR

O 23,85 EUR less

Description and parameters
Comments0
Evaluation0
Category

Ceramic protection for ALU wheels Koch Chemie Ceramic Rims Cr0.01 (30 ml)

Highly effective ceramic protection specially developed for aluminium and cast wheels. Creates a hard, hydrophobic and durable coating that protects wheels from brake dust, road dirt, salt, UV radiation and corrosion. Facilitates cleaning and significantly extends the life of the wheel surface.

Main characteristics

Strong ceramic coating with long-term protection for aluminium wheels.
Hydrophobic effect - water and dirt easily run off the surface of the wheels.
Resistant to chemicals, brake dust and salt.
Enhances the appearance and shine of aluminium wheels.
Suitable for all types of aluminium and cast wheels.
Low consumption with high efficiency.
Lifespan of 12 months.

How to use

Never apply the protective coating in direct sunlight or on hot ALU wheel surfaces.
Work in a well-ventilated workshop or garage; never work in an enclosed space without ventilation.
First, remove any loose rust from the wheels using Gyeon Q²M Iron WheelCleaner REDEFINED and any tar using Gyeon Q²M Tar REDEFINED.
If necessary, mechanically decontaminate the paintwork using clay.
You can read about the claying process in our article ‘How to decontaminate paintwork’.
New ALU wheels do not need to be cleaned.
A very important step is to thoroughly degrease the wheels using Gyeon Q²M Prep and a long-fibre microfibre cloth, Purestar Grass Buffing Towel.
Always wear protective rubber gloves before application – health comes first!
Shake the bottle with the ceramic coating.
Drip the ceramic coating onto the application sponge with a cloth.
Apply (if possible) in a criss-cross motion to approximately half of the outer part of the wheel and immediately wipe off with a microfibre cloth (e.g. Gyeon Q²M PolishWipe EVO or Gyeon Q²M SoftWipe EVO).
The more complex the wheels are, the smaller the areas should be. It is better to do smaller areas and wipe immediately.
If the temperature rises, shorten the time between application and wiping.
To increase durability, a second coat can be applied 240 minutes after the first coat.
We recommend changing the cloths during application, as over time the cloth will become clogged and may leave marks that cannot be removed once dry. We recommend using 2 to 3 microfibre cloths for polishing the coating.
The microfibre cloth must not fall on the floor!
After successful application, we recommend leaving the wheels in a warm and dry place for at least 12 hours to allow the coating to cure properly.
We recommend not washing the wheels for 2 weeks after application; rain is not a problem.
Subsequent maintenance of the wheels after applying the ceramic coating is very simple. Just wash the vehicle with a high-quality shampoo, such as Gyeon Q²M Bathe, and use a high-quality wheel cleaner, such as the aforementioned Gyeon Q²M Iron WheelCleaner REDEFINED.
For more useful information, see our article ‘Applying ceramic protection to aluminium wheels’.

About the brand

Koch Chemie is a leading German brand specialising in professional car care and detailing products. It offers a wide range of products for complete exterior and interior care of vehicles, from gentle cleaners, active foams and shampoos to waxes, sealants, microfibre cloths and special accessories. Koch Chemie products are known for their high quality, effectiveness and innovative composition, which meets the demands of professionals and discerning home users alike. The brand's portfolio also includes the new Colourlock sub-brand, which specialises in premium care for leather surfaces. Colourlock offers innovative products for cleaning, treating and restoring leather, which preserve its natural structure and extend the life of vehicle interiors and other leather items. This sub-brand complements Koch Chemie's range with comprehensive care solutions not only for paintwork but also for luxury leather materials. The Koch Chemie brand is therefore the ideal choice for anyone looking for professional, effective and reliable care for their vehicle and its interior, whether at home or in professional detailing.